Hi Everyone!

I've made an adapter, using the Rasbperry Pico W and an Original Xbox Connector, for the Joypad OS.
My intetion was to use the BT2USB firmware.

I've flashed it sucessfuly, paired the controller (DualShock 4) but the Original Xbox doesn't seem to receive any inputs or detect the Pico W connected on it.

I've already changed the option on the Joypad Config, to set the USB Output to "Xbox Original (XID), But the Xbox doesn't recognize it as a connected controller, even after being paired sucessfully.

I've also tested this same build with PS3, Xbox 360 and PS4 without any problems, setting their respective modes, worked just fine with these consoles.

I've tried on the version 1.8.0 and 1.9.0.

Flashed the firmware "joypad_1.9.0_bt2usb_pico_w.uf2"

Is there anything that I'm doing wrong?

Thanks in advance!